厂家会采取一些加工进而达到所需的性能要求，而阳极化处理就是提高压铸件性能的一个方法。 The die-casting die-casting parts have certain properties, such as abrasion resistance and corrosion resistance. However, in order to make the die-casting parts more suitable to meet the needs of customers, often, zinc alloy die-casting manufacturers will take some processing to achieve the required Performance requirements, and anodizing is one way to improve the performance of die castings.
件的阳极化处理是在例如三氧化铬等阳极化处理液在不超过 200V 的电压下进行的，在进行阳极化处理后的压铸件表面是多孔性的，但可在加热的水玻璃稀溶液内或者用有机涂料进行密封。 The anodizing treatment of zinc alloy die-casting is performed in anodizing solution such as chromium trioxide under a voltage of not more than 200V . The surface of the die-casting after being anodized is porous, but it can be heated in water. Sealed in dilute glass solution or with organic paint. For performance die castings, anodizing is mainly to improve the corrosion resistance of zinc alloy die castings and is an effective method to extend the life of die castings.
厂里，对阳极化处理液的要求是非常严格的，配备溶液成分的时候一定要把握住处理液里化学成分的量，保持溶液的酸碱度在合适的范围内，同时对处理液的温度要进行控制，既不能太低也不能太高。 In the zinc alloy die-casting plant, the requirements for the anodizing treatment solution are very strict. When preparing the solution components, it is necessary to grasp the amount of chemical components in the treatment solution, keep the pH of the solution in a suitable range, and at the same time, treat the treatment solution. The temperature should be controlled, neither too low nor too high.
The above article is from Enchuang Technology ( d55688.com ), a manufacturer specializing in the production of zinc alloy, aluminum alloy die-castings, and connector shells. Please indicate the source when reprinting, and call 400-8345-158 / 138-2923-5658 . Welcome your call. )