⎝⎛炸金花⎞⎠

Welcome to the official website of Dongguan Enchuang Precision Hardware Technology Co., Ltd.!

Message now to get a solution for free
Contact Enchuang
Dongguan Enchuang Precision Hardware Technology Co., Ltd.
Phone: 86 769 85470655
Mobile phone: 13829235658 Miss Cheng Fax: 86 769 85470699
Email: enchuang@163.com
Address: Building A, Changshi Science and Technology Park, Lifa Xingfa South Road, Wusha Community, Changsha Town, Dongguan City, Guangdong Province
How do zinc alloy die casting manufacturers solve the lack of net burrs in die castings

Die-casting mesh burrs are one of the common surface defects of zinc alloy die-casting manufacturers. Manufacturers will have a set of practical preventive measures against such common defects, and then produce high-quality die-casting products. What is the net-shaped burrs? What caused it? Please see below.
View details >>

Talking about the setting of inserts for zinc alloy die casting manufacturers

In zinc alloy die-casting plants, the addition of inserts can make full use of the properties of various materials such as strength, hardness, corrosion resistance, wear resistance, magnetic permeability, and electrical conductivity to meet the requirements of use under different conditions, and can compensate for Disadvantages due to the poor workability of the casting structure, and to solve the problem of die casting of parts with special technical requirements. However, it is used to assist in the processing of die castings.
View details >>

Zinc alloy die-casting manufacturers analyze effective ways to prevent slag inclusion in die-casting

In zinc alloy die-casting plants, slag inclusion is also called slag hole. It is a common internal defect of die-casting parts. Its formation is mainly related to the early molten material and die-casting process. Aluminum alloy is accidentally mixed with slag or slag during melting. The slag on the surface of the molten metal is not removed. The slag and the metal are poured into the pressure chamber or the edge of the graphite crucible used at the same time.
View details >>

How can zinc alloy die casting manufacturers effectively prevent cold bean defects?

Cold beans are one of the manifestations of the surface defects of zinc alloy die-castings. So how do cold-bean defects of die-castings occur? Production experience summarizes that cold beans are embedded on the surface of die-casting parts and metal particles that are not fully fused with the casting are called cold beans, which are usually produced in under-cast places. When the pouring system is not set properly, the filling speed is too fast, or the metal liquid flows into the type too early. Cold bean defects will occur in the cavity.
View details >>

Analysis of chemical composition adjustment of aluminum alloy during smelting process before die casting

Aluminum alloy die-casting is a rigorous process. The premise of die-casting must be to melt the aluminum alloy to make it a molten metal liquid. During the smelting process, alloy rainbow shares may be changed for various reasons. This change It may make the actual composition of the melt deviate greatly from the calculated value of the ingredients. Therefore, after the melting of the charge, a sample must be taken for rapid analysis in order to
View details >>

Zinc alloy die casting manufacturers collectively prepare for the annual meeting to invite you to enjoy

I believe that members of each company will have an expectation for their annual meeting. This afternoon, after a two-month hard rehearsal, Entron zinc alloy die-casting manufacturers will hold an annual meeting in Entron playground. Say goodbye formally.
View details >>

七乐彩 龙博线上娱乐 真人游戏平台注册 天天电玩城